Your daily water
Shouldn't leave you
feeling heavy.

Reverse Osmosis (RO) removes many dissolved impurities from water and can also reduce naturally occurring minerals such as calcium and magnesium. The output is highly purified water, which may be slightly acidic depending on the source water and system design. For this reason, some people prefer water treatment systems that retain naturally occurring minerals after filtration.

DVINE H2O works in two stages instead. First, a multi-stage filtration system helps reduce contaminants such as sediments, chlorine, heavy metals, pesticides, and other unwanted impurities. Then, the water passes through a Titanium-Platinum electrolytic cell that produces alkaline ionized water with selectable pH levels (up to pH 9.5, depending on the model and source water). Unlike systems that add minerals artificially, DVINE H2O utilizes the minerals already present in the source water for the ionization process. The result is purified water with its naturally occurring mineral content retained, while providing alkaline drinking water for everyday use.

Yes. Every DVINE H2O unit is engineered for Indian municipal and borewell water — including varying TDS levels, hardness, sediment, and other water-quality challenges commonly found across India.

The intake stage is designed to work with a wide range of source-water conditions, while the built-in filtration system helps reduce sediments, chlorine, heavy metals, and other unwanted impurities before the water reaches the ionization chamber. Before installation, our team conducts a free on-site water-quality assessment (including parameters such as pH, TDS, and source-water suitability) to ensure optimal performance. Whether you're using municipal water or borewell water, the system produces alkaline ionized water with selectable pH levels (up to pH 9.5, depending on the model and source water), while helping maintain water quality and taste through its advanced filtration and ionization process.

The Crystal and Titan 111 use a three-stage filtration system: a sediment pre-filter, an activated-carbon block, and the core hydrogen-ionizer unit. The filters typically need to be replaced every 8–12 months, depending on water quality and usage. Combined, the annual cost works out to approximately ₹10,000 per year.

Every Crystal/Titan ships with a 1-year machine warranty and a 5-year warranty on the ionizer plates. Replacement filters can be provided when the unit's filter-life indicator signals that a change is required, helping ensure consistent performance. The Hydrogen Bottle has no replaceable filters at all; the SPE/PEM electrolytic cell lasts approximately 5,000 charge cycles before any servicing is needed.